home *** CD-ROM | disk | FTP | other *** search
- Path: news.ifm.liu.se!usenet
- From: The Software Guru <y95thosu@isy.liu.se>
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Help!!! moved Internal HD flopy to external and it doesn't work.
- Date: 5 Feb 1996 11:05:48 GMT
- Organization: Link÷ping Institute of Technology
- Message-ID: <4f4oac$b5c@newsy.ifm.liu.se>
- References: <4f1djc$rua@falcon.ccs.uwo.ca>
- NNTP-Posting-Host: ray.isy.liu.se
- Mime-Version: 1.0
- Content-Type: text/plain; charset=us-ascii
- Content-Transfer-Encoding: 7bit
- X-Mailer: Mozilla 1.12 (X11; I; SunOS 4.1.4 sun4m)
- X-URL: news:4f1djc$rua@falcon.ccs.uwo.ca
-
- khetsah@mustang.uwo.ca () wrote:
- >
- >Help.
- >
- >I just pulled out a high-density floppy ( from inside a dead A3000 )
- >and put it in an external case and tried hooking it up to my
- >A4000 and A3000T.
- >
- >Neither would recognize it as a high-density drive.
- >I then hooked it up as df0: in the tower and it worked fine.
- >
- >Can anyone tell me what the problem is?
- >
- >thanks!!!
- >
-
- Were you trying to use it as df1: or df2:?
- In that case, you have to change a jumper or two on the drive
- or there might be a little switch or something.
- Look at the back of the drive.
-
-
- --
-
- ________ _______ ________
- \#######\ \######\ \#######\ <y95thosu@isy.liu.se>
- \#\ \#\____ \#\ ___
- \#\ \#####\ \#\ \##\ Pay a visit to GuruLand:
- \#\ \#\ \#\ \#\
- \#\ _____\#\ \#\__\#\ http://www.edu.isy.liu.se/~y95thosu
- \#\ \#######\ \######\
-
- The Software Guru
-
-